Draw Tite Activator 2 Manual. Keep these instructions with the brake control. If you have any questions about this free online manual, don’t hesitate to ask minedit down below.
Drawtite Activator II Brake Control Universal Wiring Adapter w from www.ebay.com
Web using the other (2) self tapping screws as shown in the illustration. Instructions for the installation and operation of electronic brake control for 2, 4, 6 & 8 brake applications components of the brake control a. Wire as shown at right.
Web Instructions For The Installation And Operation Of Electronic Brake Control For 2, 4, 6 & 8 Brake Applications Read This First:
Read and follow these instructions. 4 may 2019, 12:45 pm rating: • with the output control still set at maximum, slowly activate the.
Of Wires, One Row Has Four Wires (Inside Row) The Other Has.
Web manual control the manual control is located on the front of the brakecontrol unit at the right side. Keep these instructions with the brake control. Starting with the output control in the lowest position (all the way right) roll forward slowly and stop.
In Order To Read Or.
Web the connector has two rows. While watching the test bulb, hold the red wire on the positive (+) battery terminal. Wire as shown at right.
If No Trailer Braking Is Felt Adjust The Output Control Slightly To The Left.
Setup preliminary adjustments with the trailer connected press and hold the brake pedal, the display will show the output setting. Read and follow all instructions carefully before installing or operating the brake control. Keep instructions in your tow vehicle for future reference.
5 May 2019, 14:57 Pm Rating:
Connect the black wire to the “ aux” side of the circuit breaker with a ring terminal. Web using the other (2) self tapping screws as shown in the illustration. Web draw tite activator 2 manual file name:
